Call us
HAMMERHEAD

HAMMERHEAD

Call for Price

Price

Make:
Lane Shark
Model:
HAMMERHEAD
Category:
Brush Cutters, Lane Shark, New

HAMMERHEAD COMPATIBILITY:

  • Hydraulic implement flow rate 8.5gpm to 20gpm
  • Must have a third function to operate. Must have a WR Long C-Flow component OR return direct to sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
  • NOT COMPATIBLE WITH DIVERTER VALVES
  • Minimum dry tractor weight of 3000 lbs
  • Minimum tractor width of 55 inches
  • Must have certified roll over protection system
  • For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.   

    HAMMERHEAD DETAILS:

    • Hammerhead control switch box included
    • Cutting width / cutting area of 44″
    • Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. Cutting width is 44″. The Hammerhead has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
    • The Lane Shark Hammerhead attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
    • Rear rubber skirt and skid shoes for a smoother cutting process
    • The Lane Shark Hammerhead weighs just under 550 pounds
    • When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
    • NOT COMPATIBLE WITH SKID STEERS

Similar Products

Lane Shark LS-4

Lane Shark LS-4

COMPATIABILITY: Hydraulic implement flow rate 8.5gpm to 14.9gpm – Sta...
Lane Shark LS-3

Lane Shark LS-3

Hydraulic Flow Range: 5-8.5gpm Weight: 320lbs Dimensions: 34&...
Lane Shark LS-2

Lane Shark LS-2

Hydraulic Flow Range: 8.5-15gpm (Standard Motor) 15-20gpm (Larger ...